Kitchen Renovation Kentish Town

GS Renovation designs and builds kitchens across Kentish Town, from the closet-wing galleys of NW5 terraces to bright open-plan rooms near Hampstead Heath. We handle the cabinetry, worktops, plumbing, electrics and any structural knock-through as a single project, so your new kitchen arrives finished and fully working.

In Kentish Town, a kitchen renovation typically costs £18,000 to £60,000 or more from design to fitting (indicative London ranges, MyBuilder and Checkatrade, 2026). GS Renovation Ltd, a building contractor based in Potters Bar, does the work in Kentish Town: we carry the strip-out, services and fit as one contract, with the electrics certified by a registered electrician.

How the job runs

1. Free design visit at your Kentish Town home and an itemised quote.
2. Strip-out and any structural work, first-fix plumbing and electrics, plastering.
3. Units fitted and levelled; stone worktops templated and cut off site.
4. Worktops, appliances, tiling and second fix. Electrics certified under Part P by a registered electrician, or notified to building control. Typically 3 to 5 weeks on site.

Open-plan kitchen-diners in Kentish Town

In a Kentish Town terraced house, a common kitchen project opens the rear of the terrace, knocking the kitchen through to the middle reception or into a side-return infill to create one sociable kitchen-diner. That dividing wall is almost always load-bearing, so we install a steel beam sized by a structural engineer and signed off by building control. The result floods the back of these NW5 houses with light where a dark galley once stood.

Around the structure we fit the kitchen itself. Quartz, granite or composite worktops suit the hard-wearing life of a family kitchen, integrated appliances keep the lines clean, and considered task and feature lighting lifts the space. We route the new plumbing and electrics, tile the splashbacks and floors, and make sure the notifiable electrical work is certified by a registered electrician under Part P, or notified to building control, before we hand the room back.

Housing in Kentish Town

The stock in Kentish Town runs to roughly 8,940 dwellings, 87% of them flats and 13% houses, built 44% before 1919, 4% between 1919 and 1939 and 52% after 1945. Where most homes are flats, a kitchen sink in a flat in Kentish Town has to stay within reach of the shared soil stack.

Kitchens in Kentish Town flats: what the freeholder controls

87% of Kentish Town homes are flats, so the kitchen you plan is usually inside a building someone else owns. The wall a cooker hood would duct through, the window over the sink and the stack the waste joins are structure or common parts, and the lease normally keeps those with the freeholder. That makes the extract route and the waste connection the first two questions, before the cabinet layout. A recirculating hood and a sink kept near the existing waste avoid both, and in a flat they are often the right answer.

Moving the kitchen is a bigger step. A new drainage run or a removed wall is building work, and Camden requires a leaseholder doing it to hold the freeholder's consent and apply on full plans, with a decision within 6 weeks, or 2 months for more complex proposals. In a Kentish Town kitchen that date sets the order date for the units and worktops, so we submit as soon as the layout is fixed and book delivery for after the decision.

Bespoke fitted kitchens for period proportions

Kentish Town terraces come with chimney breasts, alcoves and tall ceilings that rarely match off-the-shelf units, so made-to-measure cabinetry earns its place. We plan the layout around the awkward returns and the closet-wing footprint, using full-height storage to reclaim space and framing the original features rather than fighting them. Whether the look is handleless contemporary or a classic Shaker, we build it to fit the house.

A kitchen refit is more than boxes on a wall, and internal kitchen work needs no planning permission, which keeps things straightforward. We coordinate the plumbing moves, the extraction and ventilation, the electrical circuits and the tiling in one sequence so the trades never trip over each other. In an occupied NW5 home we protect the rest of the house, contain the dust and keep the disruption to the shortest possible window.

Looking after the kitchen after handover

A new kitchen settles during its first year. Doors and drawers can drift slightly out of alignment as the house and the units find their level, particularly over an old timber floor, so we come back and adjust them rather than leaving you to work it out. Hinges and runners are adjustable by design, and a few minutes with a screwdriver keeps everything closing squarely again.

The finishes want a little attention too. Silicone around a sink or a splashback is a wearing part rather than a permanent one, and it is worth replacing when it starts to discolour. Stone tops need the right cleaner and timber wants oiling once or twice a year. We leave you the appliance documents, the paint codes and a note of what was used where, so a repair in five years matches what is already in the room rather than being the closest thing a supplier still stocks.

• New circuits, sockets and dedicated appliance supplies
• Pantry, larder and utility room integration
• Handleless, shaker and in-frame door styles fitted

VOA Council Tax stock of properties, March 2025, for Kentish Town West and Kentish Town East. Counts rounded by the VOA.

Work in Kentish Town rarely sits on its own, so you may also want load-bearing wall removal in Kentish Town, kitchen renovation across Camden, kitchen fitting in London, when a kitchen needs a building contractor, our London kitchen renovation page and Galley Kitchen Ideas.

Why Kentish Town Homeowners Choose GS Renovation

Kentish Town owners choose GS Renovation because one team delivers the whole kitchen, including any steel beam knock-through, the services and the finish, all signed off. Our founder's 30+ years on the tools means we work cleanly in occupied homes, install the structure exactly as the engineer sizes it, and design around the period proportions so the finished kitchen fits the house and lasts.

Checked by Abdelaaziz Saaid, founder and director of GS Renovation Ltd (Companies House no. 14611254). Structural design is by the consulting engineer appointed to your project.