GS Renovation builds loft conversions across Enfield, covering the interwar semis of EN1, EN2 and EN3 and the suburban streets of N13, N14 and N21 out towards Trent Park. Roof shape varies widely across the borough, so the survey decides the type of conversion, not the sales visit, and the hipped 1930s roof is the most common starting point.
Matching the conversion to the Enfield roof
Enfield has three broad house types and each takes a different loft. The 1930s semis and detached houses that dominate EN1 and EN3 usually have hipped roofs, so hip to gable plus a rear dormer is the standard answer and gives the most floor for the money. The Victorian and Edwardian terraces closer to Enfield Town and in N9 tend to have a rear closet wing, where an L-shaped dormer works better. The substantial detached houses around N14 and N21 sometimes have height for a rooflight conversion alone.
Ridge height is the deciding measurement in all three cases. Around 2.2m to 2.4m from the existing ceiling to the ridge gives room for the new floor build-up, insulation, a finished ceiling and a stair that meets Part K. Interwar roofs here are generally purlin framed and straightforward to work with; a few later houses have trussed rafters, which have to be restructured entirely and add cost, so we identify the roof type on the first visit.
Enfield Council, volume allowances and the party wall
For a house, the permitted development allowance is commonly cited as 50 cubic metres on a semi-detached or detached property and 40 on a terrace, with conditions: nothing forward of the existing roof plane, materials to match, obscure glazing to side windows and no balcony. Enfield Council has conservation areas across the borough, including around Forty Hall and the older village centres, and permitted development is withdrawn in them and by any Article 4 direction covering your street.
We recommend a lawful development certificate where a scheme proceeds under permitted development, because it is the document a buyer's solicitor will ask for later. Building control approval is separate and always required, covering fire safety, stair geometry, structure, insulation and ventilation. On a semi, the new steels bear into the wall shared with your neighbour, which makes the work notifiable under the Party Wall etc. Act 1996. We prepare the notices; as building owner you serve them.
- Protected stair enclosure and fire doors to Part B
- Party Wall notices prepared for the building owner to serve
- Building control inspections booked at floor, steel and completion
- Dormer cheeks, flat roof and leadwork detailed to last
- Structural steel sized by the engineer and set on padstones
The GS Renovation Difference in Enfield
Enfield covers a lot of ground and a lot of roof shapes, so GS Renovation starts with a survey rather than a standard package. One team then handles the engineer, the steel, the dormer, the party wall notices and Enfield Council building control. Fully insured, dedicated project manager, free no-obligation quotations, 4.9 from 31 MyBuilder reviews.
- A dedicated project manager from first survey to handover
- Water tank removed and the system converted where it blocks the space
- Rated 4.9 from 31 reviews on MyBuilder
- New floor structure carried on steel, never on the old ceiling joists
- Honest updates if a date or a detail has to move
- Fully insured, with cover in place on every site